KoldLok® 3030 Split Integral Brush Grommet (Each)

The KoldLok Split Integral raised floor grommet is a KoldLok Integral raised floor grommet that has been cut in half. It is ideally designed for new installations and fits into the raised floor tiles prior to the installation of the cabinets. When fitted at the edge of a floor tile it will allow cables to be removed. Alternatively it can be used to go around existing cables that come through the centre of a tile where a flush finish is required, without the need to disconnect them. KoldLok Benefits: Increases existing cooling unit capacity Reduces the need to purchase additional cooling units Improves equipment reliability and extends equipment life Increases static pressure under the raised floor and improves cool air elivery Facilitates Cold Aisle / Hot Aisle best practices KoldLok Split Integral Features: The fibres are cantilevered, so forcing them to close There are over 3000 filaments per cross sectional inch The moulded plastic rim protects cables from any sharp metal edges the cut tile may have The Integral raised floor grommet is inherently self-sealing, using multi-layered, different sized filaments which interweave and overlap Dimensions: Overall dimensions are 279mm x 210mm x 41mm Usable cable opening of 203mm x 102mm Tile cut-out dimensions of 235mm x 172mm