600mm Retrofit Air-Guard Kit (Each)

The GTAG5 AIR GUARD Kits are designed to fit into both new and existing non standard cut outs using brush seal technology. Can be cut to fit custom floor cut-out sizes. As with all Air-Guard products, brushes are designed to overlap offering a better air seal The brush can be cut as required to fit any custom floor cut-out size The kit is easy to install with a factory applied adhesive strip to the back of both brush sections The engineered side rails integrate with the brush sections The side rails are cut as required and screw fixed into position to form a complete edge seal Sealing around cable openings offers the following benefits: Reduced air loss and increased under floor static pressure Improved cooling efficiencies and extended cooling equipment life Dramatically reduced plant running costs. Over 50% of conditioned air does not get to the air intake of data rom equipment due to unsealed openings Facilitates Cold/Hot aisle best practice Seals cable openings to prevent under floor contamination Maximum dimension 612mm x 225mm