1 amp White Single USB Charger (Each)

Specification: Supply Voltage: 220 ? 240 Vac, 47 ? 53Hz Supply Current at full load: 0.3A Single, 0.6A Twin Standby Current: 1.3mA Single, 2.5mA Twin Charging Output: 5Vdc ? 5%, 1.0A per socket Output Connector: USB Type ?A? Overload Protection: If the device is overloaded or short-circuited, the electronic circuit will limit the output power within safe limits to provide protection against damage or overheating. The Charger Terminals will accept: 1 x 2.5mm2 conductor OR 2 x 1.5mm2 conductor OR 2 x 1.0mm2 conductor Ensure that the power supply to the circuit is isolated before attempting to install or connect the charger. Units are for the standard Euromod style faceplates, therefore they are 50 x 25mm Can be ?Link Wired? into an adjacent Power Unit. The USB chargers can be used in conjunction with existing Desk Power/Data units. An existing unit with a conventional USB can be converted into 1 amp charge by the use of a USB connecting lead. Installation Instructions: Please note that this unit must be installed by a competent person, in accordance with the current IEE Wiring Regulations, (BS7671), and with due regard to these instructions. Failure to install correctly will negate the product warranty. The USB Charger is a delicate electronic device, and care should be exercised to ensure it is not damaged during installation, particularly by pressure on the enclosure by compressing excess wire into the mounting box. This may compromise safety. The Charger must not be installed in Bathrooms, wet rooms, or in any location subject to water splashing or condensation. The device must be installed vertically. It is normal for the front surface of the charger to become warm in use. Connections: Fit the unit to the Wall Plate before making any connections. Strip the wires to expose 7 to 8mm of copper conductor Connect the Brown or Red wire to the terminal marked ? L ? Connect the Blue or Black wire to the terminal marked ? N ? Ensure that the earth wire (Green / Yellow sleeve) is securely connected to the metal mounting box used in the installation. Do Not Megga Test